3 Link Kit with 1.25" Heims
3-Link Kit with 1.25" Heims
Complete 3-link systemâbuilt for hardcore suspension setups.
This 3-Link Kit gives you everything you need to build a proven front or rear suspension systemâminus the DOM tubing. Built around six heat-treated 1.25" chromoly heims, this setup is what weâve trusted on our own rigs through some of the gnarliest trails. Whether youâre building a comp buggy, trail crawler, or custom rear link setup, this kit brings the strength and versatility you need to get it done right.
The included panhard setup uses 7/8" heims and our offset axle panhard bracket to help dial in steering geometry on full hydraulic or mechanical setups. And since all brackets are built around 9/16" hardware, you wonât need to modify a thing to match our bolt kit. Just weld it up and hit the trail.
Key Features
- Part Number: R1036
- Includes six 1.25" chromoly rod ends with jam nuts and tube adapters
- Fully loaded panhard setup with brackets and 7/8" heims
- All brackets built for 9/16" hardware â no drilling or sizing needed
- Compatible with 1.5" ID x .250" wall DOM tubing (not included)
Whatâs Included
- 3x RH 1.25" Chromoly Heims with jam nuts and weld-in bungs
- 3x LH 1.25" Chromoly Heims with jam nuts and weld-in bungs
- 12x High Misalignment Spacers (9/16â ID, 2.625â width)
- 2x 7/8" Heims for Panhard Bar with 9/16â misalignment spacers
- 1x Offset Axle Panhard Bracket
- 1x Frame Panhard Bracket (inside or outside mount)
- 2x Axle-Side Lower Link Brackets (0°)
- 2x Frame-Side Link Brackets
- 1x Adjustable Upper Axle Link Tower
- 1x Upper Link Bracket (choose adjustable or 3-leg style)
- 1x Complete Grade 8 Bolt Kit â All 9/16"
Tech Tip: Only lubricate rod ends with Tri-Flow. Using WD-40, PB Blaster, or other petroleum-based products can damage the liner and will void the warranty.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
3 Link Kit with 1.25" Heims
3 Link Kit with 1.25" Heims
3-Link Kit with 1.25" Heims
Complete 3-link systemâbuilt for hardcore suspension setups.
This 3-Link Kit gives you everything you need to build a proven front or rear suspension systemâminus the DOM tubing. Built around six heat-treated 1.25" chromoly heims, this setup is what weâve trusted on our own rigs through some of the gnarliest trails. Whether youâre building a comp buggy, trail crawler, or custom rear link setup, this kit brings the strength and versatility you need to get it done right.
The included panhard setup uses 7/8" heims and our offset axle panhard bracket to help dial in steering geometry on full hydraulic or mechanical setups. And since all brackets are built around 9/16" hardware, you wonât need to modify a thing to match our bolt kit. Just weld it up and hit the trail.
Key Features
- Part Number: R1036
- Includes six 1.25" chromoly rod ends with jam nuts and tube adapters
- Fully loaded panhard setup with brackets and 7/8" heims
- All brackets built for 9/16" hardware â no drilling or sizing needed
- Compatible with 1.5" ID x .250" wall DOM tubing (not included)
Whatâs Included
- 3x RH 1.25" Chromoly Heims with jam nuts and weld-in bungs
- 3x LH 1.25" Chromoly Heims with jam nuts and weld-in bungs
- 12x High Misalignment Spacers (9/16â ID, 2.625â width)
- 2x 7/8" Heims for Panhard Bar with 9/16â misalignment spacers
- 1x Offset Axle Panhard Bracket
- 1x Frame Panhard Bracket (inside or outside mount)
- 2x Axle-Side Lower Link Brackets (0°)
- 2x Frame-Side Link Brackets
- 1x Adjustable Upper Axle Link Tower
- 1x Upper Link Bracket (choose adjustable or 3-leg style)
- 1x Complete Grade 8 Bolt Kit â All 9/16"
Tech Tip: Only lubricate rod ends with Tri-Flow. Using WD-40, PB Blaster, or other petroleum-based products can damage the liner and will void the warranty.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
3-Link Kit with 1.25" Heims
Complete 3-link systemâbuilt for hardcore suspension setups.
This 3-Link Kit gives you everything you need to build a proven front or rear suspension systemâminus the DOM tubing. Built around six heat-treated 1.25" chromoly heims, this setup is what weâve trusted on our own rigs through some of the gnarliest trails. Whether youâre building a comp buggy, trail crawler, or custom rear link setup, this kit brings the strength and versatility you need to get it done right.
The included panhard setup uses 7/8" heims and our offset axle panhard bracket to help dial in steering geometry on full hydraulic or mechanical setups. And since all brackets are built around 9/16" hardware, you wonât need to modify a thing to match our bolt kit. Just weld it up and hit the trail.
Key Features
- Part Number: R1036
- Includes six 1.25" chromoly rod ends with jam nuts and tube adapters
- Fully loaded panhard setup with brackets and 7/8" heims
- All brackets built for 9/16" hardware â no drilling or sizing needed
- Compatible with 1.5" ID x .250" wall DOM tubing (not included)
Whatâs Included
- 3x RH 1.25" Chromoly Heims with jam nuts and weld-in bungs
- 3x LH 1.25" Chromoly Heims with jam nuts and weld-in bungs
- 12x High Misalignment Spacers (9/16â ID, 2.625â width)
- 2x 7/8" Heims for Panhard Bar with 9/16â misalignment spacers
- 1x Offset Axle Panhard Bracket
- 1x Frame Panhard Bracket (inside or outside mount)
- 2x Axle-Side Lower Link Brackets (0°)
- 2x Frame-Side Link Brackets
- 1x Adjustable Upper Axle Link Tower
- 1x Upper Link Bracket (choose adjustable or 3-leg style)
- 1x Complete Grade 8 Bolt Kit â All 9/16"
Tech Tip: Only lubricate rod ends with Tri-Flow. Using WD-40, PB Blaster, or other petroleum-based products can damage the liner and will void the warranty.
